Reducing Soybean Production Costs in 2016

Soybean market prices for the 2016-2017 marketing year are projected to be near or below the breakeven price when land costs are included. Because of this, soybean producers will need to increase efficiencies and reduce production costs in 2016. The following is a list of recommendations from Michigan State University Extension for reducing soybean production costs without significantly affecting yields.

Rotate crops

Planting soybeans after soybeans will reduce your yield potential by 5 percent after the first year and by at least 10 percent the second year. In addition, long-term pests such as soybean cyst nematodes and white mold are more likely to increase when soybeans are planted after soybeans.

Reduce or eliminate tillage operations

Tillage trials conducted across the U.S. and in Ontario have shown that tillage does not significantly affect soybean yield. In some cases, no-till yields were higher than tilled yields. If your fields are relatively smooth and free from harvest ruts and your planting equipment is equipped to plant through the existing residue, consider planting the field without additional tillage. This will save $12 to $17 per acre. Tillage operations may be necessary to repair harvest ruts prior to planting and may be beneficial when planting very early (last week of April).

Select high-yielding and pest resistant varieties

Variety selection is always your most important decision when planting soybeans. By choosing varieties carefully, you can increase your yield potential by 5 to 10 bushels per acre and reduce yield losses due to white mold, sudden death syndrome, Phytophthora root and stem rot and soybean cyst nematodes without any additional cost. The final step is to strategically match the varieties you selected with the pest pressure and productivity of your specific fields

Plant soybeans early

Numerous planting date comparisons have shown that the optimum time to plant soybeans is the first week of May. Yield losses of 0.3 to 0.6 bushels per acre have been documented for each day that planting is delayed after May 8. Again, this practice increases yields without any additional cost.

Reduce planting rates

In general, most agronomists agree that 100,000 relatively uniformly spaced plants at harvest will produce the maximum economic return under most conditions. This could justifiably be increased to 120,000 plants per acre to build in a buffer for adverse conditions and to increase peace of mind. In northern Michigan, where early group I varieties are planted, the target harvest populations should be between 125,000 and 140,000 plants per acre. Under good conditions, planting rates should be 15 to 20 percent higher than your intended harvest populations. Additional information on fine-tuning soybean seeding rates is available at “Soybean seeding rate recommendations.” The results of the 2015 SMaRT soybean planting rate trials are also available in the 2015 SMaRT Research Report.

Base lime applications on soil test results

Soybeans will generally perform well at soil pH levels between 6.0 and 7.0. However, the optimal range is between 6.3 and 6.5 as this range maximizes nutrient availability and biological nitrogen fixation while minimizing soybean cyst nematode population growth. Variable rate lime applications are highly recommended to achieve more uniform soil pH levels within fields. See “Managing soil pH for optimal soybean production” for additional information on managing soil pH for soybeans.

Don’t apply nitrogen fertilizer

Hundreds of university trials have shown that nitrogen fertilizer applications to soybeans are rarely profitable. The potential for a profitable response increases in very high yielding environments (greater than 68 bushels per acre).

Don’t apply foliar fertilizers

Foliar fertilizer applications to soybeans are rarely profitable. This has been demonstrated in hundreds of university trials conducted across the U.S. and also locally in the Michigan foliar fertilizer trials. The one exception is when foliar applications of manganese fertilizers are made to correct visible manganese deficiency symptoms.

Apply phosphorus (P) and potassium (K) fertilizers as needed to maintain critical soil test levels

The critical level for a given nutrient is the soil test level at which 95 to 97 percent of the crop’s yield potential will be reached with no additional inputs of the nutrient. The critical level for P is 15 parts per million (ppm) and the maintenance range for soybeans is 15 ppm, so P soil test levels should be maintained between 15 and 30 ppm.

The critical K level is calculated by multiplying the cation exchange capacity (CEC) by 2.5 and adding 75. For example, the critical K level for a soil having a CEC of 12 meq/100g is 105 ppm [(12 x 2.5) + 75]. The maintenance range for soybeans is 30 ppm, so the K soil test level for this soil should be maintained between 105 ppm and 135 ppm. See “Phosphorus and potassium fertilizer recommendations for high-yielding, profitable soybeans” for additional information on managing P and K.

Apply seed treatments only when warranted

Soybean seed treatments including fungicides, insecticides, inoculants and nematicides have produced inconsistent yield benefits in university trials. However, they may be warranted when pest problems such as soybean cyst nematodes or Phytophthora root rot have been verified or when planting conditions favor pest damage. Examples of planting conditions that increase the potential for pest damage include early planting (Pythium and sudden death syndrome), planting into grass sods (white grubs and wireworms) and when manure or green plant material has been incorporated within two weeks of planting (seed corn maggot).

Consider eliminating foliar fungicide applications unless field and weather conditions are favorable for white mold

Prophylactic foliar fungicide applications have produced modest yield increases in Michigan on-farm research trials. Stratego YLD was evaluated in nine trials in 2012 and 2013, producing an average yield increase of 1.4 bushels per acre. Priaxor increased yields by 2.1 bushels per acre when averaged across 22 trials conducted in 2014 and 2015. These yield increases are not sufficient to cover product and application costs given the projected market prices.

Foliar fungicides applied to control or suppress white mold have produced mixed results in university trials with the disease incidence being reduced by 0 to 60 percent. See “Applying fungicides for white mold management in soybeans” for more information.

Select and apply herbicides to maximize weed control and minimize crop damage

The MSU Weed Science Program evaluates commercially available weed control programs each year. The most profitable weed control programs year-in and year-out provide the highest level of weed control and minimize crop injury. The cost of the weed control programs is also considered, but this does not affect overall profitability as much as the level of weed control and crop injury.

Reducing production costs and improving efficiency will help soybean producers respond to the projected market prices.

This article was produced by the SMaRT project (Soybean Management and Research Technology). The SMaRT project was developed to help Michigan producers increase soybean yields and farm profitability. The SMaRT project is a partnership between MSU Extension and the Michigan Soybean Promotion Committee.

Source: Michigan State University Extension

ProAg Quick Links

Agent Toolbox Grower Toolbox Careers

ProAg News

2019 fall cover crop considerations

In our business, we have seen some excellent soil health and erosion benefits from cover crops and encourage growers to take a look at the rewards cover crops can provide. Whether you plan to interseed into a standing crop or wait to plant until after harvest, there are many options and variables to consider....

Dicamba Injury Study

Research has shown that soybeans entering the reproductive phase are most vulnerable to injury from dicamba. That reproductive time is now across the major production areas, according to the latest U.S. Department of Agriculture (USDA) Crop Progress and condition reports....

Bill would protect U.S. domestic food supply

U.S. Senators introduced bipartisan legislation to address the shortage of agricultural inspectors who protect our food supply and agricultural industries at the border. Agricultural inspectors work to prevent the intentional or unintentional entry of harmful plants, food, animals and goods into the United States....
Get ProAg updates via email
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now